How to Apply to Engineering at Robert Morris University: ABET-Accredited Engineering and Manufacturing Engineering, Test-Optional, with Admission Routes and Prerequisites for Domestic, International (Including Chinese) and Transfer Applicants
Robert Morris University (Moon Township, Pennsylvania) offers a B.S. in Engineering (biomedical, industrial, mechanical and software concentrations) and a B.S. in Manufacturing (Manufacturing Engineering), both accredited by the Engineering Accreditation Commission of ABET. This guide follows the official website: the 3.0 GPA and B-or-better trigonometry or pre-calculus conditions for direct admission to engineering, math placement, 2026-27 engineering tuition, international English minimums, merit scholarship tiers beginning with 2027-28, and transfer requirements. Items the website does not publish are marked as such.
1. Degrees and majors
Robert Morris University (RMU) is in Moon Township, Pennsylvania. Engineering is offered by the Department of Engineering in the School of Engineering and Science; the international admission page still uses the older name School of Engineering, Mathematics and Science.
Undergraduate degrees:
- Engineering B.S., with four concentrations listed on the website: Biomedical, Industrial, Mechanical and Software.
- Bachelor of Science in Manufacturing (Manufacturing Engineering), described by the website as the only four-year manufacturing engineering degree in western Pennsylvania.
- The department's program table also lists Computer Science B.S., which is not covered here.
- A Pre-Engineering certificate builds mathematics, science and engineering foundations for entry to RMU's B.S. engineering programs.
Accreditation: the website states that the Bachelor of Science in Engineering and the Bachelor of Science in Manufacturing Engineering are accredited by the Engineering Accreditation Commission of ABET.
Admission route: the website says students who meet the program's minimum criteria are offered full admission directly into their program of choice (see section 2). The thresholds for changing concentration or moving between programs are not published on the pages read.
Other features: the mechanical concentration page and the manufacturing engineering page show four-year course plans and a 4+1 integrated degree that leads to an M.S. in Engineering Management with one additional year. The department's Learning Factory provides hands-on design, testing and manufacturing experience.
2. Prerequisites
The undergraduate admissions requirements page lists these conditions for Engineering:
- 3.0 GPA;
- a grade of B or better in Trig or Pre-Calculus;
- a strong math and science background.
The website says students who meet the minimum criteria are offered full admission directly into their program of choice, and that an official high school transcript is required to evaluate applicants to these majors (most other majors can use a self-reported GPA). Faculty and department heads review students who are close to meeting the requirements together with admissions.
Math placement (from the Placement Exams page):
- Most students are placed automatically from SAT or ACT scores; students without SAT/ACT must take a placement exam, and students with scores can take an optional exam to challenge their placement.
- SAT 650-800 or ACT 28-36 places into MATH2070 Calculus with Analytic Geometry; SAT 590-640 or ACT 25-27 places into courses such as MATH1020 Pre-Calculus; SAT 510-580 or ACT 20-24 places into MATH1010 or MATH1050; SAT below 510 or ACT below 20 places into MATH0900.
- The website strongly encourages engineering students to enroll in MATH 2070 in their first semester unless they already hold equivalent transfer credit. Engineering uses the 45-minute Calculus placement exam.
AP and IB: the AP & IB credit page links to a chart of accepted exams, required scores and course equivalents; the page text itself does not list scores, so check the chart. Dual enrollment credit requires a grade of C or better and an official transcript.
3. Application rounds, deadlines and materials
- How to apply: RMU's online application, which the international admission page describes as free.
- Domestic first-year deadlines: not published on the pages read (the admissions requirements page, the apply page and the enrollment checklist); ask the admissions office (admissions@rmu.edu).
- International deadlines: the website lists May 1 for fall attendance and November 1 for spring attendance and does not state the year, so confirm that they apply to fall 2027.
- Materials: all admitted students must provide a final high school transcript with cumulative GPA and graduation date confirmed before enrolling (an official GED transcript is also acceptable). The website says preference is given to students with a cumulative 3.0 GPA or higher and a well-rounded college-preparatory background. Essays and recommendation letters: not published on the pages read.
- Testing: SAT/ACT scores are optional for first-year applicants in all programs (see the test-optional page); this does not affect scholarship consideration, and scores can be submitted later.
- Deposit: the enrollment checklist gives May 1, 2026 as the deposit deadline for the Class of 2030; the date for 2027 entry is not published.
- Financial aid: FAFSA with RMU school code 003359; the Pennsylvania state FAFSA deadline is May 1.
4. Domestic applicants (in-state vs out-of-state tuition, aid and scholarships)
- Tuition: RMU is a private university, and the undergraduate tuition page prices by program, not by state residency, so there is no in-state or out-of-state difference. For Engineering and Nursing in 2026-27 (Fall 2026 and Spring 2027), full-time flat-rate tuition (12-18 credits) is $20,400 per semester and the per-credit rate is $1,310.
- Pennsylvania residents may qualify for state aid such as the PA State Grant, for which the FAFSA is the application; see the scholarships page.
- Institutional merit scholarships (starting with Fall 2027, awarded by the Office of Admissions from the official weighted GPA at admission): $29,000 for a weighted GPA of 3.9 or higher; $27,000 for 3.50-3.89; $24,000 for 3.00-3.49; $19,000 for 2.70-2.99; $13,000 for 2.50-2.69; and $11,000 for below 2.50. Full-time students can keep them for up to four years with an overall 2.0 GPA, and RMU may recalculate weighted GPAs by its own method.
- In-state preference or guaranteed admission: not published.
5. International applicants (English requirements and waivers, transcripts, credential evaluation, proof of funds)
This section follows the international student admission page.
- Undergraduate first-year applicants submit the online application, official transcripts from all secondary schools attended, English test scores and a copy of the passport.
- English minimums: TOEFL iBT 55; IELTS Academic overall band 5; Duolingo English Test 90; PTE 42. The website also says an SAT Evidence-Based Reading and Writing score of 540 or higher may be accepted instead of an English exam.
- Waivers and conditional admission: the website lists partnerships with the English Language Institute (ELI) at the University of Pittsburgh and the ELS Language Center; completing the stated levels (ELI level 5 or 6, ELS Level 112) can waive the TOEFL/IELTS requirement, and current students may be considered for conditional admission. A country-based exemption list is not published.
- Credential evaluation: applicants who want to be considered for a scholarship must submit an official foreign transcript evaluation (General Evaluation with GPA) from a NACES-approved provider, sent to RMU by the provider. The page suggests TEC (The Evaluation Company) and mentions a 20% discount.
- Scholarships: RMU offers academic scholarships to undergraduate international students at the point of acceptance; applicants without a calculated 4.0-scale GPA need a NACES evaluation with a U.S. cumulative GPA.
- Visa steps: after acceptance, pay the enrollment deposit (or request a waiver if you have a fully funded scholarship) and complete the I-20 request form in the admissions portal.
- The specific proof-of-funds documents for undergraduates are not listed on this page; the I-20 request form lists the documents required after admission.
6. Applicants from China
The website has no dedicated statement for applicants from China, and whether the gaokao is considered is not published. The international page asks for official transcripts from all secondary schools (with an evaluation if you want a scholarship) and an English test score. Contact the international admissions office (intladmissions@rmu.edu) to confirm the documents needed for Chinese credentials.
7. Costs and scholarships
Budget items for 2026-27 (full-time undergraduates) from the cost of attendance page:
| Item | Amount |
|---|---|
| Special Major Flat Rate tuition for Engineering and Nursing | $40,800 |
| Room and board: dorm (double room, All-Access meal plan) | $13,570 |
| Room and board: on-campus apartment | $19,020 |
| Books | $1,000 |
| University Service Fee | $1,190 |
| Student Recreation Fee | $250 |
| New Student Orientation Fee (new students entering in Fall 2026, one time) | $200 |
- The example totals on the cost page ($58,102 for a dorm and $63,352 for an apartment) use standard tuition of $37,090, so engineering students should substitute the $40,800 program rate.
- Engineering tuition is higher than the standard rate: the tuition page lists a dedicated Engineering and Nursing rate, and the Accelerated Engineering Program is $21,415 per semester or $1,385 per credit.
- Tuition for 2027-28 is not published on the pages read.
- Engineering-specific scholarships are not published; engineering students use the institutional scholarships in section 4. The department page mentions internships and co-op programs, but arrangements and costs are not published.
8. Transfer
The transfer requirements page states:
- Materials: official transcripts from every college attended, sent by the issuing school to RMU (transcripts submitted by the student are considered unofficial), and high school transcripts if fewer than 30 credits have been earned.
- Engineering: 3.0 GPA and college-level Calculus 1 and Physics 1. A chemistry sequence requirement is not published.
- Credit: the transfer credits policy says RMU will consider up to 81 transfer credits, with a minimum grade of C per course; bachelor's degree students must complete at least 51% of the major at RMU and the final 30 credits at RMU.
- Scholarships by cumulative college GPA (starting with Fall 2027): $20,000 above 3.75; $19,000 for 3.6-3.74; $17,000 for 3.25-3.59; $15,000 for 2.7-3.24; and $10,000 below 2.69.
- Deadlines: transfer deadlines are not published on that page. International applicants use May 1 (fall) and November 1 (spring); international transfer applicants also need a course-by-course NACES evaluation and the same English scores as first-year applicants.
Frequently asked questions
What do you need for direct admission to engineering at Robert Morris University?
The website lists a 3.0 GPA, a grade of B or better in Trig or Pre-Calculus, and a strong math and science background. Students who meet the minimum criteria are offered full admission directly into their program, and an official high school transcript is required.
What are the English test minimums for international students at Robert Morris University?
TOEFL iBT 55, IELTS Academic overall band 5, Duolingo English Test 90, or PTE 42. An SAT Evidence-Based Reading and Writing score of 540 or higher may be accepted instead.
What is the international application deadline at Robert Morris University?
The website lists May 1 for fall attendance and November 1 for spring attendance, without stating the year. The deadline for domestic first-year applicants is not published.
How much is engineering tuition at Robert Morris University for 2026-27?
Full-time flat-rate tuition (12-18 credits) for Engineering and Nursing is $20,400 per semester, with a per-credit rate of $1,310; the cost page lists $40,800 for the year. The website does not distinguish in-state from out-of-state students.
Does Robert Morris University require the SAT or ACT?
No. SAT and ACT scores are optional for first-year applicants in all programs, and the website says this does not affect scholarship consideration. Scores can be submitted later.
Need Help?
The information above follows the official website; please check the current deadlines, costs and requirements on the RMU website before you apply.
References
- Department of Engineering
- Engineering B.S. (Mechanical concentration)
- Bachelor of Science in Manufacturing (Manufacturing Engineering)
- Pre-Engineering Certificate
- Undergraduate Admissions Requirements
- Test-Optional Admission
- Placement Exams
- AP & IB Credit
- New Student Enrollment Checklist
- Apply to Robert Morris University
- International Student Admission Process
- Undergraduate Tuition
- Cost of Attendance
- Scholarships
- Transfer Admissions Requirements
- Transfer Credits Policy